February 2002 - Stalker V6
I drove to Florida on the 14th and stayed with Dennis and Pat of Brunton automotive whilst testing the prototype and learning about the building process.
On the 18th I towed the frame, engine, gearbox, rear diff, fiberglass, aluminum panelling and suspension parts back to Michigan.
A come-along attached to a garage roof beam helped lift the engine onto an engine stand.
I welded together a table on castors to make chassis work easier.
The frame was sanded of all its rough edges with a Dremel-type drill.
The chassis ready for collection, prior to fitting the rollbar
Me, standing by my kit at Dennis Brunton’s garage, with bodywork test-fitted.
Ready to drag the kit back to Michigan.
